Block Adobe Hosts Windows 10

Posted : admin On 1/26/2022
  1. Block Adobe Hosts Windows 10 64-bit
  2. Block Adobe Hosts Windows 10 Download

HostsNews blog & Updates
Blocking Unwanted Connections with a Hosts File
Folks ... sorry for the delay (again) in getting out an update ... just got out of the Hospital ... I now have some severe health issues to deal with (complete Kidney failure ... need a Kidney transplant) plus another operation ... large needles inserted into my spine ...however I will try to better maintain the MVPS HOSTS file. Well just got back from Hospital again (excessive water in lungs)
If you could ... please consider a donation. Thanks to all that contributed ... every little bit helps.

What it does ...

You can use a modified HOSTS file to block ads, banners, 3rd party Cookies, 3rd party page counters, web bugs, and even most hijackers and possibly unwanted programs. This is accomplished by blocking the connection(s) that supplies these little gems. The Hosts file is loaded into memory (cache) at startup, so there is no need to turn on, adjust or change any settings with the exception of the DNS Client service (see below). Windows automatically looks for the existence of a HOSTS file and if found, checks the HOSTS file first for entries to the web page you just requested. The (prefix) is considered the location of your computer, so when an entry listed in the MVPS HOSTS file is requested on a page you are viewing, your computer thinks is the location of the file. When this file is not located it skips onto the next file and thus the ad server is blocked from loading the banner, Cookie, or some unscrupulous tracker, or javascript file.

Example - the following entry blocks all files supplied by that DoubleClick Server to the web page you are viewing. This also prevents the server from tracking your movements. Why? ... because in certain cases 'Ad Servers' like Doubleclick (and many others) will try silently to open a separate connection on the webpage you are viewing, record your movements then yes ... follow you to additional sites you may visit.

Using a well designed HOSTS file can speed the loading of web pages by not having to wait for these ads, annoying banners, hit counters, etc. to load. This also helps to protect your Privacy and Security by blocking sites that may track your viewing habits, also known as 'click-thru tracking' or Data Miners. Simply using a HOSTS file is not a cure-all against all the dangers on the Internet, but it does provide another very effective 'Layer of Protection'.

In case you're wondering ... this all happens in microseconds, which is much faster than trying to fetch a file from half way around the world. Another great feature of the HOSTS file is that it is a two-way file, meaning if some parasite does get into your system (usually bundled with other products) the culprit can not get out (call home) as long as the necessary entries exist. This is why it's important to keep your HOSTS file up to Date. Get notified of MVPS HOSTS updates.

Special Note: new Windows 10 users ... the MVPS Hosts file installs just fine, no need to make any changes.

Simply follow the instructions for Windows 10/8

MVPS HOSTS includes entries for most major parasites, hijackers and unwanted Adware/Spyware programs!

Started providing a HOSTS file in 1998 ... and now celebrating 20 yrs. proudly still the #1 rated HOSTS file on Google ...

To view the HOSTS file in plain text form. (345 kb) (opens in new browser)
Note: The text version also makes a terrific searchable reference for determining possible unwanted connections. [Updated October-25-2020]

Important Note: The HOSTS file now contains a change in the prefix in the HOSTS entries to '' instead of the usual ''.
This was done to resolve a slowdown issue that occurs with the change Microsoft made in the 'TCP loopback interface' in Win8.1.
This change in the prefix should not affect everyday users. I've had some feedback that COMODO antivirus, and System Mechanic seems to have issues with the '' prefix ... to resolve this issue:

You can use the 'Replace' function in Notepad to convert the entries, or either of these freeware utilities (see below) has an option for converting the entries from '' to '

This download includes a simple batch file (mvps.bat) that will rename the existing HOSTS file to HOSTS.MVP then copy the included updated HOSTS file to the proper location. For more information please see the Windows version that applies to you ...

Windows 10/8 install instructions see here
Windows 7 requires special instructions see here

When you run the (mvps.bat) batch file - right-click and select: Run as Administrator. Once updated you should see another prompt that the task was completed. Some users may see a pop-up from certain Security programs about changes to the HOSTS file. Allow the change ... however if you see this pop-up (changes to the HOSTS file) at any other time ... investigate.
Download Information: (checksum info is on the HOSTS file itself not the '')
: 5B269EA131819DEFF186B33189C7AAD6 SHA-1: 16B35D3AAFEDDD05D9027C8C020B882E419CEB6D
Manual Install Method - Unzip in a 'temp' folder and place in the appropriate installed location:

  • If you are having trouble downloading or extracting the HOSTS file [click here]
    Note: the below locations are for the typical default paths, edit as needed.
  • Run autoruns64.exe as ADMINISTRATOR and wait until it finishes it's scan.
  • In the program menu under OPTIONS, uncheck the 'Hide Windows Entries' option
  • Go to the Services tab, scroll down to the Dnscache entry and clear (uncheck) the checkmark.
  • You can FILE / SAVE, to save a copy of the new configuration settings.
  • Close autoruns64, reboot and check the services manager -- DNS Client is disabled. [screenshot]
  • If you decide that you want the DNS Client service running ... You can make a little batch file that will flush the DNS whenever you desire.
    Open Notepad and enter the following:

    ipconfig /flushdns

    Then File > Save As > change the file type to All files, and name the batch file to flushdns.bat and place it in your Windows folder.

    Locate flushdns.bat right-click and select Send To > Desktop as shortcut.

    Windows 10 (early versions) /8/7

    In most cases the DNS Client Service is not needed, it is recommended to turn it off. These instructions are intended for a single (home-user) PC. If your machine is part of a 'Domain', check with your IT Dept. before applying this work-around. This especially applies to Laptop users who travel or bring their work machines home. Make sure to reset the Service (if needed) prior to connecting (reboot required) to your work Domain ...

    To resolve this issue (manually) open the 'Services Editor'

    • Start Run (type) 'services.msc' (no quotes)
      Win8 users - Control Panel > Administrative Tools > Services
    • Scroll down to 'DNS Client', Right-click and select: Properties - click Stop
    • Click the drop-down arrow for 'Startup type'
    • Select: Manual (recommended) or Disabled click Apply/Ok and restart.

    Hostsman includes an option to turn off the DNS Service [screenshot]

    When set to Manual you can see that the above 'Service' is not needed (after a little browsing - when set to Manual) by opening the Services Editor again, scroll down to DNS Client and check the 'Status' column. It should be blank, if it was needed it would show 'Started' in that column. There are several Utilities that can reset the DNS Client for you ... [more info]

    Important! If you are using Network Discovery then the DNS Client service is required and should not be set to either Manual or Disabled.

    Workaround for using the MVPS HOSTS file and leaving the DNS Client service enabled (set to: Automatic)

    • If you find after a period of time that your browser seems sluggish with the DNS Client service enabled you can manually flush the DNS cache
    • Close all browser windows ... open a 'Command Prompt' from the Start Menu > All Programs > Accessories > Command Prompt
      Win8 users - Charms Bar > Search > (type) command prompt > Select: Command Promt (left pane) Ok the UAC prompt
    • (type) ipconfig /flushdns (press Enter) Then close the Command Prompt ...

    A better Win10/8/7 workaround would be to add two Registry entries to control the amount of time the DNS cache is saved. (KB318803)

    • Flush the existing DNS cache (see above)
    • Start > Run (type) regedit
      Win8 users - from the Charms Bar, select: Search (type) run and select Run (left pane) and (type) 'regedit' (no quotes)
    • Navigate to the following location:
    • Click Edit > New > DWORD Value (type) MaxCacheTtl
    • Click Edit > New > DWORD Value (type) MaxNegativeCacheTtl
    • Next right-click on the MaxCacheTtl entry (right pane) and select: Modify and change the value to 1
    • The MaxNegativeCacheTtl entry should already have a value of 0 (leave it that way - see screenshot)
    • Close Regedit and reboot ...
    • As usual you should always backup your Registry before editing ... see Regedit Help under 'Exporting Registry files'

    For all other Questions, Issues and Solutions - see:The HOSTS File FAQ
    For detailed Download and Extract Instructions - see: Download Help

    Related Utilities

    Hosts File Editor ... great little freeware program with all the features of Hostsman ...
    HostsMan is a freeware application that lets you manage, Edit and Enable/Disable your Hosts file.
    Includes an option to turn off the unneeded DNS Client Service. [screenshot]
    This also has an option to update the existing HOSTS file when needed.
    Important! - make sure you select: Default action - Overwrite

    Once installed locate the Hostsman location, right-click on 'hm.exe' and select: Properties
    Click the Compatibility tab and select: 'Run as Administrator' [screenshot]

    Note: seems no longer exists. I have saved a copy of Hostsman, the installer version,
    since several other sites still offer Hostsman.

    Rename the HOSTS file on the fly ... a simple one click batch file.
    PowerShell script to automatically download, unzip and update the local host file. macOs version
    Another PowerShell version ...

    Other Programs using the MVPS HOSTS file

    • HOW TO DEPLOY MVPS HOSTS FILE ON AN ANDROID PHONE (requires rooted device)
    • uBlock Origin (for Google Chrome - screenshot) The extension is available for several browsers:
      Chrome, Chromium, Edge, Firefox, Opera, Pale Moon, as well as versions of Safari ...
    • HostsEdit - Command line utility for editing Windows HOSTS file

    Linux and Mac Users

    Although I do not use either Linux or a Mac, I often get requests for 'How To' on that system, so here are a few resources:

    • AdBlock by FutureMind (paid app $2.99) Enables hosts file to be loaded into unrooted/non-jailbroken iPhones and iPads.

    Various Troubleshooting Articles

    To contribute a listing for our resources, or any other comments:Contact

    Block Adobe Hosts Windows 10

    Firstly do not edit the Hosts.ics file, only the hosts file, hosts.ics is managed by Windows OS. To be able to see your hosts file you have to show hidden files and system files. On the View tab of Windows File Explorer, check the box 'Hidden Items' 2. If you still cannot see the hosts file, click 'Options' on the view tab, in the resulting. How to Prevent Windows 10 to Maximize Screens Automatically. When you drag a window to the top of your screen, it maximizes automatically. Finding that annoying? We have the right solution for you! SHOW ALL ARTICLES. 4 comments for “ How to Disable Adobe Updater ” EDJ, December 20, 2019 at 8:27 pm Adobe Acrobat Reader DC.

    Adobe Thanks to everyone involved for providing the online update notices for the HOSTS file. These updates are posted to most major security related sites, Newsgroups, and mailing lists, blogs etc. Get notified of MVPS HOSTS updates.

    Reproduction of information on this site, in any form, is prohibited without express written permission.
    Microsoft and or are in no way affiliated with, nor offers endorsement of, this site.

    This work is licensed under a Creative Commons License Download this page as a PDF file

    Copyright © 1998 - 2020 All rights reserved.

    The world of internet is a pool of numerous websites which has turned everything digital. But not all those website might be appropriate for everyone.Suppose that you want to stop your friends or children from opening a particular website on your computer. Just telling them to stop opening them wouldn’t be a great solution. If you feel that you need to block certain sites manually be changing certain settings on your system, here you go. This article is going to navigate you perfectly through the steps you need to follow in order to accomplish it.

    But before we proceed,let me introduce you to a new term Windows Host File. The hostnames connected to a network needs to be mapped to their corresponding IP addresses. This is done so to uniquely identify a particular system in a pool of systems connected to the Internet. This Windows Host file is responsible for providing this mapping function. Slight modifications made to this file can help you block the particular website. Well, now let us start discussing the process.

    Also read: – How to restrict PC usage time for an account on Windows 10


    Step 1 – Open your file explorer and copy and paste the given path below to address bar and go to etc folder.


    Step 2 –

    Now, Right click and copy the hosts file and paste it somewhere else on your computer. Lets copy and paste it on desktop.

    Step 3 – Go to desktop and right click and click on open with.

    Block Adobe Hosts Windows 10 64-bit

    Adobe block host file

    Step 4 – Now, choose notepad as the option to open the file with notepad.

    Step 5 – Once the file opens up, just scroll down and copy and paste these two lines at the bottom. Just make sure to change the websitename with the name of the file which you want to block.

    For example if you want to block facebook, just put the code as shown below.

    STEP 6

    Now, save the changes to the file. Now, copy and paste it back again in the etcfolder. The original file will get replaced.

    STEP 7

    How to redirect Blocked website to another website

    Block Adobe Hosts Windows 10 Download

    Now suppose that you need to make any other website open up when your friends secretly try to open up the site you had opposed. Lets see how it can be done.

    • Open up the command prompt and type ping The sitename is the name of the site to which you want the website to be redirected on. Say for example you need to redirect to, you can type ping This will give you the IP address of the site.

    As shown above,I have obtained the address for

    • Now, as described above, instead of adding to the bottom of notepad, you can add


    IPaddress is the address you have currently received from command prompt and website name is the name of the site you want to redirect to another site.

    In my case, I am redirecting the site to the Google’s site which has the IP address From now on the Google’s site opens up when you search for

    Recommended for You: