Gns3 Ios Images Download Windows

Posted : admin On 1/25/2022
  • Hello, 1.) I do not have a service contract. I am a contractor, so cannot use my employer's service contract. 2.) GNS3, a network emulator lab tool, to study for the CCNP. 3.) GNS3 recommends the following router images: C3640, C3660, C3725, C3745, C7200. I don't necessarily need the hardware, just.
  • Storage: 1 GB available space (Windows Installation is Images. DOWNLOAD GNS3 2.2.17 / 2.2.2020-12-07 Nightly for Windows.
  • How do you build Cisco networks in GNS3? In this video I show you how to download Cisco IOS images (Cisco VIRL images) to run IOSv and IOSvL2 in your GNS3 to.

GNS3 offers multiple ways to emulate IOS. For older images, we use and maintain Dynamips; an emulator dedicated to emulate some Cisco hardware. Dynamips can run unmodified IOS images. In the new GNS3 1.4, there is a way to run a second category of switches and routers. These are classified as Routing and Switching virtual machines (or R+Svms) for short. What are the differences? Here are the major differences:

Which IOS images should I be using? Where do I get Cisco IOS images? This is one of multiple videos showing you how to install. Download the IOS file. Open GNS3 and click Edit file menu and from sub-menu click Preferences. Navigate to Dynamips- IOS routers option in left pane and click New button in right pane. Select New Image option and click Browse button. Now select the downloaded IOS image file. By default IOS files are compressed.

  • IOS images are usually run in Dynamips however R+Svms are housed in a virtual machine.
  • IOS images are lower in cpu and memory so you can fit more of them in one topology.
  • R+Svms are all vendor Routing and Switching images that are larger in size but can be imported into GNS3 for real world network emulation.

Important Points#

Availability#

Due to these platforms hitting End of Sale, End of Life, and End of Support status, the images are no longer available for download from Cisco’s support sections. Currently, the c7200 images are the only ones still available for download for those with a support contract.

IOS 15.x#

Only the c7200 series get newer IOS 15 images. All other platforms are now end-of-life and only support IOS 12.4. Please note that the IOSv appliance is based on IOS 15 and there are IOU (IOS on UNIX) images with IOS 15.

Should I use a mainline and technology train image?#

You will find the technology train images to contain the newest features but it may also contain the most bugs. We recommend Mainline over Technology train if you are interested on stability without the need of new features.Please see Cisco IOS Versions and Naming for more information.

Minimum memory#

The minimum RAM is the amount of memory needed for IOS to work at maximum capacity with most feature configured and activated. From experience you can usually use a bit less RAM just fine.

Recommended images#

Download

We really recommend using the c3640, c3660, c3725, c3745 and c7200 IOS images listed below, they have proven to be the most stable in GNS3 provided you use the right amount of RAM and Idle-PC value.

Idle-PC value#

When Dynamips runs an IOS image, a single instance can consume 100% of the processing time for a CPU core or thread. To remedy this, you can supply Dynamips with an Idle-PC value, to consume less CPU. This value will vary between devices/images. To help automate the process of determining a valid Idle-PC value, you can use the Idle-PC finder button when importing a supported IOS image into GNS3:

(Idle-PC values are not required with virtual machines or docker containers. They’re only required for use by the Dynamips emulator)

C1700 Series#

1700s have 1 FastEthernet fixed port (C1700-MB-1ETH) on its motherboard, 2 subslots for WICs (maximum of 2 Ethernet ports or 4 serial ports), and no Network Module slots. Note that interfaces do not use a slot designation (e.g. “f0”)

IOS version 12.4.25d (Mainline)#

File name: c1700-adventerprisek9-mz.124-25d.binMD5: 3ed8d56a8757771105a56070e4147716Minimum RAM: 128MBProposed idle-PC value: 0x80358a60

IOS version 12.4.15T14 (Technology train)File name: c1700-adventerprisek9-mz.124-15.T14.binMD5: 351190de8764263e85a2b50718f394fdMinimum RAM: 160MBProposed idle-PC value: 0x824a4dc4

C2600 Series#

2600s have one or two Ethernet or FastEthernet interfaces on its motherboard, 3 subslots for WICs (maximum of 6 serial ports) and 1 Network Module slot (maximum of 4 Ethernet ports or 16 FastEthernet ports).

IOS version 12.4.25d (Mainline)#

File name: c2600-adventerprisek9-mz.124-25d.binMD5: 8eca1f6fe57dfb3c3cf3568c0e475853Minimum RAM: 128MBProposed idle-PC value: 0x80519c48

IOS version 12.4.15T14 (Technology train)#

File name: c2600-adventerprisek9-mz.124-15.T14.binMD5: 12b8548b23e2ec593652ae9310ac797fMinimum RAM: 256MBProposed idle-PC value: 0x8027ec88

C3620#

The c3620 supports up to 2 Network Modules (maximum of 8 Ethernet ports, 32 FastEthernet ports or 8 serial ports). Note that tt shouldn’t be used since the latest available IOS image is very old.

IOS version 12.2.26c#

File name: c3620-a3jk8s-mz.122-26c.binMD5: dd34b958ad362ef54ba48b187f4c97b4Minimum RAM: 64MBProposed idle-PC value: 0x603a8bac

Latest Ios Images For Gns3

C3640#

The c3640 supports up to 4 Network Modules (maximum of 16 Ethernet ports, 32 FastEthernet ports or 16 serial ports).

IOS version 12.4.25d (Mainline)#

Gns3 ios images download windows 7

File name: c3640-a3js-mz.124-25d.binMD5: db9f63ca1b46d18fb835496bfffe608aMinimum RAM: 128MBProposed idle-PC value: 0x6050b114

C3660#

The c3660 has 2 FastEthernet fixed ports (Leopard-2FE) and supports up to 6 Network Modules (maximum of 24 Ethernet ports, 32 FastEthernet ports or 24 serial ports).

IOS version 12.4.25d (Mainline)#

File name: c3660-a3jk9s-mz.124-25d.binMD5: 4ac7e947f13c189d746149dc74992890Minimum RAM: 192MBProposed idle-PC value: 0x606071f8

IOS version 12.4.15T14 (Technology train)#

File name: c3660-a3jk9s-mz.124-15.T14.binMD5: 39950b7a563aa08e94a168260409f1e6Minimum RAM: 256MBProposed idle-PC value: 0x6076e0b4

C2691#

The c2691 has 2 FastEthernet interfaces its motherboard (GT96100-FE), 3 subslots for WICs (maximum of 6 serial ports) and 1 Network Module slot (maximum of 16 FastEthernet ports or 4 serial ports).

IOS version 12.4.25d (Mainline)#

File name: c2691-adventerprisek9-mz.124-25d.binMD5: a8e1f5821d87456595488d6221ce42e5Minimum RAM: 192MBProposed idle-PC value: 0x60a48cb8

IOS version 12.4.15T14 (Technology train)#

File name: c2691-adventerprisek9-mz.124-15.T14.binMD5: 91388104d7276ad09204e36d2dfcf52dMinimum RAM: 256MBProposed idle-PC value: 0x60bcf9f8

C3725#

The c3725 has 2 FastEthernet interfaces on its motherboard (GT96100-FE), 3 subslots for WICs (maximum of 6 serial ports) and 2 Network Module slots (maximum of 32 FastEthernet ports or 8 serial ports).

IOS version 12.4.25d (Mainline)#

File name: c3725-adventerprisek9-mz.24-25d.binMD5: ac3d313d3caff5beeee244b81d2c024cMinimum RAM: 128MBProposed idle-PC value: 0x602467a4

IOS version 12.4.15T14 (Technology train)#

File name: c3725-adventerprisek9-mz.124-15.T14.binMD5: 42baf17af10d9a1471bf542f0bfd07c7Minimum RAM: 256MBProposed idle-PC value: 0x60c09aa0

C3745#

The c3745 has 2 FastEthernet interfaces on its motherboard (GT96100-FE), 3 subslots for WICs (maximum of 6 serial ports) and 4 Network Module slots (maximum of 32 FastEthernet ports or 16 serial ports).

IOS version 12.4.25d (Mainline)#

File name: c3745-adventerprisek9-mz.124-25d.binMD5: 563797308a3036337c3dee9b4ab54649Minimum RAM: 256MBProposed idle-PC value: 0x60aa1da0

IOS version 12.4.15T14 (Technology train)#

File name: c3745-adventerprisek9-mz.124-15.T14.binMD5: a696619869a972ec3a27742d38031b6aMinimum RAM: 256 RAMProposed idle-PC value: 0x602701e4

C7200 SERIES#

7200s have a different architecture. Only the 7206 is supported, it has 6 Port Adapters (PA) slots. VXR chassis, NPE-400 and C7200-IO-FE are the default settings in GNS3.

IOS 15 (Mainline)#

This router series is still getting new IOS 15.x versions.The last one at this date is:File name: c7200-adventerprisek9-mz.152-4.M8.binMinimum RAM: 512MB

IOS 12.4.25g (Mainline)#

MD5: 3a78cb61831b3ef1530f7402f5986556File name: c7200-a3jk9s-mz.124-25g.binMinimum RAM: 256MB

IOS 12.4.24T5 (Technology train)#

This one is not the latest 12.4 version but it is easier to find.MD5: 3c4148f62acf56602ce3b371ebae60c9File name: c7200-adventerprisek9-mz.124-24.T5Minimum RAM: 256MBProposed idle-PC value: 0x606df838

Gns3 Ios Images Download Free Windows

Gns3 Ios Images Download Windows

Cisco Catalyst Switches#

Dynamips is incapable of running IOS images from Catalyst Switches, as it’s unable to emulate the ASICs used in those type of devices.

For switching, you can use an IOU L2 binary image, or an IOSvL2 virtual disk image with Qemu.

However, if you want to use Dynamips you can use the EtherSwitch module with 2600s, 3600s and 3700s Series. Keep in mind that this module works differently (it uses the vlan database etc.) and does NOT support the following features:

  • Access Switch Device Manager (SDM) Template
  • ACL – Improved Merging Algorithm
  • ARP Optimization
  • BGP Increased Support of Numbered as-path Access Lists to 500
  • BGP Restart Neighbor Session After max-prefix Limit Reached
  • BGP Route-Map Continue Support for Outbound Policy
  • Clear Counters Per Port
  • DHCP Snooping
  • DHCP Snooping Counters
  • Diagnostics Options on bootup
  • ErrDisable Reactivation Per Port
  • ErrDisable timeout
  • EtherChannel – Flexible PAgP
  • Etherchannel Guard
  • Fallback Bridging
  • Flex Link Bi-directional Fast Convergence
  • Flex Link VLAN Load-Balancing
  • Flex Links Interface Preemption
  • GOLD – Generic Online Diagnostics
  • IEEE 802.1ab, Link Layer Discovery Protocol
  • IEEE 802.1s – Multiple Spanning Tree (MST) Standard Compliance
  • IEEE 802.1s VLAN Multiple Spanning Trees
  • IEEE 802.1t
  • IEEE 802.1W Spanning Tree Rapid Reconfiguration
  • IEEE 802.1x – Auth Fail Open
  • IEEE 802.1x – Auth Fail VLAN
  • IEEE 802.1x – VLAN Assignment
  • IEEE 802.1x – Wake on LAN Support
  • IEEE 802.1X Multi-Domain Authentication
  • IEEE 802.1x RADIUS Accounting
  • IEEE 802.1x with Port Security
  • IEEE 802.3ad Link Aggregation (LACP)
  • IEEE 802.3af Power over Ethernet
  • IGMP Fast Leave
  • IGMP Version 1
  • IGRP
  • IP Phone Detection Enhancements
  • IP Phone Enhancement – PHY Loop Detection
  • IPSG (IP Source Guard)
  • Jumbo Frames
  • L2PT – Layer 2 Protocol Tunneling
  • MAC Authentication Bypass
  • MLD Snooping
  • Multicast Etherchannel Load Balancing
  • NAC – L2 IEEE 802.1x
  • NAC – L2 IP
  • NAC – L2 IP with Auth Fail Open
  • Packet-Based Storm Control
  • Per Port Per VLAN Policing
  • Port Security
  • Port Security on Private VLAN Ports
  • Private VLANs
  • QoS Policy Propagation via Border Gateway Protocol (QPPB)
  • Rapid-Per-VLAN-Spanning Tree (Rapid-PVST)
  • Reduced MAC Address Usage
  • Remote SPAN (RSPAN)
  • Smart Port
  • Spanning Tree Protocol (STP) – Loop Guard
  • Spanning Tree Protocol (STP) – PortFast BPDU Filtering
  • Spanning Tree Protocol (STP) – Portfast Support for Trunks
  • Spanning Tree Protocol (STP) – Root Guard
  • Spanning Tree Protocol (STP) – Uplink Load Balancing
  • SRR (Shaped Round Robin)
  • Standby Supervisor Port Usage
  • STP Syslog Messages
  • Switching Database Manager (SDM)
  • Trunk Failover
  • Trusted boundary (extended trust for CDP devices)
  • Unicast Mac Filtering
  • UniDirectional Link Detection (UDLD)
  • VLAN Access Control List (VACL)
  • VLAN Aware Port Security
  • Weighted Tail Drop (WTD)
  • Routing and Switching Virtual machines from Vendors

To recap: You can import many images using Virtualbox or VMWare. ASIC based models like the Cisco Catalyst switches are impossible to import as a Routing and Switching image.

If you require more switching features, it is recommended to use larger Virtual Machine Switches and Routers (like the ones from VIRL) that run inside your choice of Qemu, Virtualbox or VMWare. For advanced switching IOSv and/or IOU is recommended.

Gns3 Ios Files

Download 3640 Switch IOS image for Gns3 3600 Series:

GNS3 is network simulator and offers number of ways to emulate Cisco Image or other IOS. YOu can run different Cisco IOS images in gns3 with Dynamips.

In Gns3 by default there is no way of running Cisco switch, but using Cisco 3640 IOS image you can convert your router into switch. There is a module i.e. NM-16ESW module which can be used with Cisco 3640 IOS in gns3 and provide you the switching features in GNS3. There are many cisco images which supports NM-16ESW-module, such Switch IOS images for GNS3 is 3600 series c3640.

You can run this IOS in GNS3 and create different switching labs with this IOS. These Switching labs includes:

  • Vlan
  • VTP
  • Inter-vlan routing

You can Download this IOS from Here for educational purpose for your GNS3. Click on the download 3640 IOS image for gns3 for starting the downloading:

3640 Switch IOS image for Gns3

You can use the following interfaces or ports/ modules with GNS3:

  1. Leopard-2FE
  2. NM-16ESW
  3. NM-1FE-TX
  4. NM-1E
  5. NM-4E
  6. NM-4T

I hope this aricle is informative for your. Share your comments in comments sections. Thank you.. !