Logixpro Silo Simulation Exercise 1 Solution

Posted : admin On 1/25/2022
Logixpro Silo Simulation Exercise 1 Solution

Bookmark File PDF Logixpro Compressor Simulation Solution Logixpro Compressor Simulation Solution. Logix Pro Silo.rsl Silo exercise fixed when switching between modes 11873. LogixPro Batch Simulator A2.pdf PDF.

Silo Simulator Exercise 2

Logixpro
  • The LogixPro Student Resources and Programming Exercises are designed to aid the student in mastering the fundamentals of RSLogix operations, programming and troubleshooting using TheLearningPit's LogixPro PLC simulation software.
  • I am working with the Silo Simulator on Logix Pro and cannot figure for how to control the scan speed or motor speed of this simulator only having access to the address of the motor and no access to the scan speed of the program. (Output O:2/0) when the box is in position underneath the silo discharge nozzle. Exercise #1 - Continuous.

Logixpro Silo Simulation Exercise 1 Solution

Logixpro Silo Simulation Exercise 1 SolutionLogixpro

PLC Exercise: Design a PLC ladder program for two floor elevator System. Make necessary assumptions as follows:

Assumptions:
• Lift door is manual sliding type. A door switch is provided to ensure the door is properly closed.
• In first Floor there is only Down Call Button
• Inside Lift, there are Both up and down button
• In Ground Floor there is only Up Call Button

Logixpro Silo Solution

Inputs:
Function Address
Up Call Button at Ground Floor I:1/0
Down Call Button at First Floor I:1/1
Up Button inside Elevator I:1/2
Down Button inside Elevator I:1/3
Door Switch (closed when door closed) I:1/4
Elevator up limit switch I:1/5
Elevator down limit switch I:1/6

Outputs:
Function Address
Lift Motor Upward Direction O:1/0
Lift Motor Downward Direction O:1/1
Ready to open door indicator Ground Floor O:1/2
Ready to open door indicator First Floor O:1/3
Ready to open door indicator inside Lift O:1/4

Logixpro Silo Simulation Exercise 1 Solution

Logixpro Door Simulator 4

Solution: