Myphone Agua Rio Custom Rom

Posted : admin On 1/25/2022
  • ROM Myphone Agua Rio S5501 V2(JB) ROM Compilation March 26, 2016 Android, ROM, Tutorials Myphone Agua Rio S5501 V2 FLASHING PROCEDURE Download and copy the custom ROM you want to flash.
  • Installing Custom Recovery for Rio Agua is easy, just follow the steps carefully. (Disclaimer: I am not held liable if you bricked your device, just follow the steps and everything will be fine.). Bakit po di madownload ang mga ROM'S? Tulong naman po dyan, na brick po kc ang MYPHONE AGUA RIO FUN ko, pls. Tumugon I-delete.

MyPhone Rio Fun V2 MTK6571 firmware/stock rom to unbrick your phone Hi, Update: Although this firmware is intended for MyPhone Rio Fun V2, with software version S5202ApKKAguaRioFun201409101.09 (as s. Collins Edim Myphone, Stock Roms Download Myphone Agua Rio Lite (S4700) official firmware from the link here, and flash with SP Flash tool for quick and easy flashing. If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.


  • Download MyPhone Agua Rio Fun Stock Firmware

Download the latest MyPhone Agua Rio Fun Stock Rom (original firmware, flash file) MyPhone Agua Rio Fun You can check out our MyPhone update page for latest information on MyPhone Agua Rio Fun update rollout.

The MyPhone Agua Rio Fun Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

Download Official MyPhone Agua Rio Fun Stock Firmware Rom ( Direct link )

Firmware File Name: MyPhone_Agua_Rio_Fun_v2_MT6571_20082014-(Flash-File.Net).zip
Firmware File Size: 269 MB
Download Flash Tool: Get SP Flash Tool for Windows Get SP Flash Tool for Linux
How to Flash firmware: Guide How to Flash Firmware

How to Flash or Install MyPhone Agua Rio Fun Firmware (ROM)

STEP 1 : Download and extract the MyPhone Agua Rio Fun stock firmware package on the computer.

  • After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
  • Install the provided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this step.
  • Follow the How-to Flash Manual to Flash or install the Firmware on your MyPhone Agua Rio Fun Stock Firmware (flash file).
  • Important Notes:

    Download SP Flash Tool: If you are looking for the official SP Flash Tool, then head over to Get SP Flash Tool for Windows or Get SP Flash Tool for Linux page.

    Please Take a Backup: Flashing or installing the MyPhone Agua Rio Fun Stock Firmware (ROM) will delete your data from the device. Therefore, we recommend you to take a backup of your data before using the Xperia Flash Tool, as it will help you to recover the data.

    Flashing the stock firmware on your MyPhone Agua Rio Fun with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

    The MyPhone Agua Rio Fun officially releases the firmware shared above. It helps you to recover the MyPhone Agua Rio Fun device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

    Request MyPhone Agua Rio Fun Firmware: If you are looking for any MyPhone Agua Rio Fun specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

    Myphone agua rio custom roma

    accident lawyer

    MyPhone My76 Android 6.0 Firmware Flash File

    This is the MyPhone My76 Official Stock ROM that can be using SP Flashtool to fix some common software problem lite; Bootloop, Stuck on logo, Infected Virus, Deadboot and others.

    Important To Read Before Flash MyPhone My76

    Flashing new firmware will delete all your user data, including contacts, messages, photos and other third party installed apps where installed and saved in internal storage. Performing backup first is highly recommended. The following are the common software problem that can be fix through flashing new firmware;

    • Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
    • Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
    • Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
    • Too Many Pattern Attempts or forgot password – This is just an alternative solution if you cannot hard reset your android phone.
    • Dead boot – Another caused of flashing incorrect ROM will lead to dead boot. Make sure you are flashing the right ROM (Firmware) for your Phone. If you think below is the right firmware for your device then nothing to worry.
    • Boot Loop – The device keep rebooting when you turned it on, Unless your power switch has been damage, Flashing new ROM will fix it.
    • And any software problem.

    Initial Steps to Install Firmware MyPhone My76

    Download and install MTK Android USB drivers

    Download And Install SP Flash Tool

    How To Flash MyPhone My76

    1. First, you need to download and install SP flash tool
    2. Download and install MTK Android USB drivers
    3. Then download Firmware file/Flash file/ROM for your phone
    4. Your phone must have 50 % charging before this process,
    5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
    6. Now open SP flash tool.exe
    7. When SP flash tool open, go to download button in SP flash tool
    8. In download tab, click on scatter load button
    9. After locating the scatter tab, click on the download button
    10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
    11. Now flashing is completed, a green ring will appear in SP flash tool
    12. Close SP flash tool on your computer and unplug phone
    13. Power on the phone and enjoy
    14. After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.

    Disclaimer: Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. NKH take no responsibility for any harm done while attempting this!

    1. Download USB Drivers For Android Install On Your Computer If Your Computer Already has USB Drivers Installed Just Skip This Step.

    2. Switch Off Your Android Device & Remove The Battery If Battery is Removable.

    3. Download Stock Firmware or Any Custom Rom Which Your Want to Flash On Your device The ROM or FIRMWARE on your Computer.

    4. Download & Install SP Flash Tool on your Computer After EXTRACTING you will Get These Following files..

    5. Now Run The Smart Phone Flash Tool.exe You Will Get This Form File in Extracted Files.

    6. Once SP Smart Tool is Start..Now Click on the DOWNLOAD TAB.

    7. In Download Tab Option..just Click on Scatter-Loading Button.

    Myphone Agua Rio Custom Romper

    8. Now..Locater The File Scatter File ( The Scatter File Included in Stock Rom Folder).

    9. Now Press On DOWNLOADBUTTON Option For Start The Flash Process.

    10. Now Connect Your Android Device to Computer Using Via USB Cable(Without Battery..If Your Phone Battery is Removable).After Connect your Device via Computer now Press Volume Down & Volume Up Key, So Your Computer is Easily Detect your Android Phone.

    11. Once Flashing Process is Completed, A Green Ring Sign will Appear.

    Just Close The SP Flash Tool & Disconnect your Android Device From The Laptop or Computer.

    Myphone Agua Rio Fun V2 Custom Rom


    Myphone Agua Rio Custom Roma

    Download MyPhone My76 Firmware