Orthoflex Saddle Serial Numbers

Posted : admin On 1/25/2022
Numbers

Normal.dotm 0 0 1 346 1973 DESIGNing Woman/Emergency Resources. 16 3 2422 12.0 0 false 18 pt 18 pt 0 0 false false false ORTHO-FLEX SADDLE- EXPRESS LITE-15” STITCHDOWN SEAT This saddle comes with comfort stretch girth($45) and leathers. Included are pop-out safety stirrups($85) and extra pads and rubbers. 2016 PATRIOT SADDLE. From $2,290 View. 2019 Low Down Roper. Regular price $3,890 View. 2019 Low Down Roper (Full Carved) Regular price $4,890 View. 2020 Reiner Saddle. Regular price $4,990 View. Baroque Dressage. From $2,699 View. Black Bison Wade. Regular price $. Shelbyville, TN 37160 Phone: 800.251.3474 Email: [email protected]

If you are looking for the best endurance saddle, you are in the right place.

Endurance horses are under tack for many hours and many miles. So, these saddles are made lightweight for providing comfort during extended hours of riding.

These are made of leather or synthetic leather combinations. They can distribute the rider’s weight over a large surface for a more extended period. They have the weight distribution property like a western saddle but with a lighter weight design.

Endurance saddles are used by trail riders, endurance riders, and endurance racing.they are usually equipped with lots of rings to tie stuff onto it — for example, breast collar and saddle packs. Just like the western saddle pads.

Not only can the rider jump out of the seat effortlessly to two-point and post, but he can also sit comfortably for more extended periods as well. Use the best saddle soap to wash them properly.

There are different styles of endurance saddles. Some of them look almost like western saddles but without the horn. And some looks like the standard English all-purpose saddles with extra padding.

But all of them can keep your horse comfortable during prolonged riding. You can choose the one that fits your riding style and preferences like the best treeless saddles.

You can check best english saddle brands.

Best endurance Saddle Comparison Chart:

9 Best endurance Saddle Reviews

  • AceRugs Walking Horse Saddle GAITED Bars Western Endurance Riding Pleasure Trail All-Purpose TACK Package Size 15 16 17 18
  • HILASON Horse English Treeless Saddle Endurance Trail Pleasure Leather
  • Wintec Pro HART Endurance Saddle.
  • Wintec Pro Endurance Saddle w/CAIR
  • Impact Gel Trail Endurance Saddle Pad 3/4″ Thick

1. AceRugs Walking Horse Saddle GAITED Bars Western Endurance Riding Pleasure Trail All-Purpose TACK Package Size 15 16 17 18

This saddle helps to maintain more balance while riding. This saddle provides extra security and strength. And it gives extra comfort to the horse.

It has adjustable Blevins buckles and also numerous leather ties for accessories. It is made of reinforced wood & fiberglass Tree. It has Well Padded Fleece Underside that gives extra comfort to the horse.

It has Quilt Stitched Seat Design and shiny silver Conchos.

Pros:

  • 100% Premium Cowhide Leather
  • Free Matching headstall, Reins, & Breast Collar
  • Well Padded Fleece
  • Gaited Tree
  • Color: Chestnut

2. HILASON Horse English Treeless Saddle Endurance Trail Pleasure Leather

This saddle is lightweight and comfortable for both the rider and the horse. It has impressive flexibility power. It helps the smooth movement of muscles making the horse faster and flexible.

This saddle helps to prevent pressure points and improves horse energy. It has an unbelievable close-contact capacity. It can be used both for trail Endurance and Pleasure riding.

This saddle has a smart combination of both English and Western styles of travel that gives the rider a comfortable and enjoyable ride.

Pros

  • High flexibility and stability power.
  • It is comfortable and balanced.
  • Lightweight
  • It is doubled layer leather.
  • Simply overlap the pressure point

3. Wintec Pro HART Endurance Saddle.

This saddle is very comfortable and protective. It has a free movement capacity.

It has an independently sealed air cushion, which helps virtually eliminating the pressure points. This saddle gives a better carriage and a happier horse.

Pros:

  • It is protective and comfortable.
  • It can eliminate pressure points.
  • It moves freely.

Cons:

  • It is pricey.

4. Wintec Pro Endurance Saddle w/CAIR

This saddle is also designed for comfort a long-distance riding. It is well balanced, superior fit, and a comfortable seat. There is a cushioning system that is helpful for both the rider and the horse.

Orthoflex saddle for sale

It gives the optimal balance and clearance to the horse. Again it helps to move both forward and backward side.

Pros:

  • Lightweight
  • It is comfortable and stable.
  • It gives better performance.

Cons:

  • It is also pricey

5. Impact Gel Trail Endurance Saddle Pad 3/4″ Thick

This saddle is heavy-duty wear leathers that will ensure years of durability. It is also flexible and comfortable to use.

It can give better performance under pressure points. It has an exceptional wool bend that allows the air between the pad and horse. It is handcrafted. The thickness of this saddle is 3/4″

Orthoflex

Orthoflex Endurance Saddles

Pros:

  • It ensures year-long durability.
  • Lightweight.
  • Flexible and comfortable.
  • Gives better performance under pressure points.

Cons:

  • Some customers complain that the leather is not double-layered, but most of the customer said that it is durable

6.Tough1 Treeless Endurance Saddle

This saddle has a high-quality fleece that gives extra comfort to the horse. It has a washable and weatherproof gullet bar.

This gullet bar is fixed under the seat, which is flexible to adjust with the horse. It is helpful for all kinds of different horses.

Pros:

  • It is lightweight.
  • It is also washable.
  • weatherproof gullet bar.
  • flexible and comfortable.
  • lower price range.

Cons:

  • This product comes with only one product.

7. King Trekker Synthetic Endurance Saddle w/HornHorn

This saddle gives outstanding performance and comfort. It is made of nylon and neoprene materials. Also, it is made of leather, fiberglass, and fleece. It is a soft padded fleece that comforts a horse to back.

It has a capacity of the tree to distribute pressure evenly to the horseback due to flexible fiberglass reinforced.

Pros:

  • comfortable and stable.
  • Flexible.
  • Its price is not so high.
  • This saddle is balanced.

Cons :

  • It is heavier than other endurance saddles.
  • design is not attractive

8. SPECIAL! Double T GAITED Western Endurance Saddle

The leather quality of this saddle is the padded seat. Fiberglass covered with 26Ibs weight.

It is a gaited horse saddle. It is chestnut in color. And the size of the seat of this saddle is 16 inches.

Pros:

  • It gives five years warranty.
  • It is comfortable

Cons:

  • The leather is thin.

9. Acerugs GAITED Brown Synthetic Western Pleasure Trail Endurance Horse Saddle Free TACK Set 14 15 16 17 18

This saddle is waterproof and lightweight. This particular product has a double reinforced fiberglass tree. It is brown in color.

It has adjustable padded stirrups and also padded synthetic fleece. This saddle has D-ring for Accessories. It has Fee Headstall and Breast Collar

Pros:

  • It is waterproof
  • It is lightweight.
  • It is comfortable and flexible
  • Low price.

Cons:

  • Some customers said it was too wide.

What is endurance riding?

Endurance riding is basically a long-hour race. Mainly it is an international competition organized by the International Federation for Equestrian Sports. It is usually a one-day competition of distance under 160 km.

Features to look at while buying endurance saddle.

  • Evaluate the leather condition of the saddle
  • Think about both rider and horse comfort.
  • Carefully check the saddle tree for breakage.
  • Examine the saddle fits.
  • Before buying carefully, check the stitching of the saddle.

Frequently Asked Questions:

What is used for endurance saddles?

Endurance saddles are specially designed for comfort during long hours in the saddle. These are suitable for trail riders, endurance riders, and endurance racing. It is made of leather or synthetic-leather combinations.

Do you buy a saddle to fit the horse or the rider?

Saddle fitting your horse is required; it also needs to match the rider. If the saddle is too small, then it will cause discomfort as you bump against the pommel at every stride. If the saddle is too large, it will have you swimming around trying to maintain your position.

How do you know if a saddle is a good quality?

You must check the quality of leather that the saddle made of either leather or synthetic leather. Look for high-quality leather that is thick and pliable when you touch it and bend it. It would help if you avoided saddles with thin, flimsy leather or texture similar to cardboard or paper, familiar with cheap saddles.

How can you tell how old a saddle is?

You should check the manufacturer’s name and logo to be stamped in plain sight on the saddle. Also, look for the back, the skirts, or a plate underneath the jockey. Call the saddle’s manufacturer for information about the saddle’s age. Some manufacturers will be able to tell you the age of the saddle using the serial number.

How much is a saddle worth?

New Saddles are less than $500, but they often come with low quality, especially leather and fittings. Custom-made saddles are much more expensive and can sell for thousands of dollars, depends on the saddle’s design and details.

Conclusion:

Endurance saddle is mainly used for long-distance races. We have reviewed the best endurance saddles available in the market for you in this article.

Among them, Hilson’s endurance saddle is the best, I think. Because it has high flexibility and lightweight as well.

This product is simply over the pressure point and faster than other saddles.

HILL VIEW FARMSâ LLC
'Proven Products for Horse and Rider'

THE FLEXIBLE DELRIN â PANEL SADDLE
NOT all Panels are Created Equal
By: Cathy Sheets Tauer - B.S. AnimalScience, E.S.M.T

©All Rights Reserved
To enlarge text for reading: Goto 'View' on your menu bar at the top of thescreen. On the pull down menu below 'View' select'Text' then select the size from the menu that pops outto the side.

Have questions or to order by phone: 507-276-8571 [email protected]

Len Brown Orthoflex Saddle

SaddlesSystem DescriptionSaddling videosSaddling BasicsThe JourneyReturn to index

Orthoflex Patriot Eagle Saddle

HISTORY OF THE FLEXIBLE Delrin® PANEL SADDLE - all TESTED and in USE since 1986!
The Systems
By: Cathy Sheets Tauer
The patent numbers, dates, along with specific details on the various systems were obtained during one-on-one interviews with Cathy from Hill View Farms and other developers/owners on their own products. A note on Patents: After a period of 16 years] (depending upon when the patent claim was filed, when it was accepted, the country in which it was filed), a patent will expire allowing anyone within the market to copy it exactly. Also, if the owner of a current patent does not file a claim of infringement within the statute of limitations (6 years in USA) to protect an existing patent, the patent then becomes an Abandoned Patent(prima-facie). Meaning that the owner of the patent relinquishes all claims henceforth, therefore making it available to the public. As for new patents based upon earlier designs, they can obtained if the new design change is greater than 20%. So the point to remember is, all patents have a limited life span and do not last forever.
A registration mark ® and a copywrite © however, can last over 50 years, but only if the renewal on the paper work is maintained. On the other hand, a trademark TM simply means that the word or image is not able to be registered for the time being as it is not unique enough to separate it from common terminology or it has not yet become a household name associating it with a company or individual. Law 101 in a nutshell.

Delrin ® Panels are now available for saddle makers worldwide to use on their saddles. This material was developed by the space program and is currently used throughout all aviation aircraft and also within the medical field. These Delrin sheets were the panels that were the heart and soul for the patented saddle that the Original Ortho-Flex ® Saddle Company developed. There are many companies that use the word FLEX in their marketing to sell their saddles. Please do not take them at their word. Make sure you are getting the 'Delrin' panel and not some facsimile of 'flex', 'panel', 'rubber' or even rawhide, wood or plastic bars that are hinged on the fork and cantle. Remember a horse’s shoulders and back move with every step and the 'flex' needs to move as quickly and as freely in all directions as the animal’s shoulders and back do, while distributing the rider’s weight evenly. Delrin material is such a product. It will not fatigue, misshape or wear out easily, and will last over years of riding. The way these sheets of Delrin are shaped, tiered and layered will make up your 'Panel'. One critical point to remember when buying a saddle is that the basic saddletree itself must be straight, and not hand made, where even the slightest variation will occur. The machines that make these saddletrees are key in the function of your saddle. To better illustrate the progress in technology represented by various saddle makers, I’ve put together a retrospective look at the different types of flexible panels as they evolved starting in 1982 and those offered to date. We begin with the foundation technology, from the Original Ortho-Flex 1 System, which subsequently led to Systems II, III, IV, V, VI VII, VIII, IX, X and the variations and extras.

First: What is Delrin®? Early in 1950 research director and chemists Frank C McGrew developed a tough and heat resistant material he called 'synthetic stone.' During the years of development, which involved a patent dispute, DuPont patented Delrin® in 1956. Delrin® (Polyoxymethylene) is an acetal homopolymer resin that is a durable lightweight crystalline plastic, which uses a breakthrough in stabilization technology. It has an excellent balance of desirable properties that bridge the gap between metals and ordinary plastics. This Delrin® which not only has memory (which allows it to return to it’s natural shape), but also has a unique combination of strength, stiffness, tensile strength, hardness, dimensional stability, toughness, fatigue resistance, solvent and fuel resistance, abrasion resistance, low wear, low friction, creep resistance under a wide range of temperature and humidity conditions, with high fatigue endurance, corrosion resistance and mechanical resilience. Due to these outstanding characteristics Delrin® is popular for its versatility within a broad use of industry applications, such as automotive, aerospace, electrical and medical applications.

IN THE BEGINNING: The System I or Mock I patent (6/26/1986-USA) was the original system used when the Brown Performance Saddle Company started in 1982. Len Brown then incorporated his business and the Ortho-Flex Saddle Co. came into existence in 1986. This is the first and oldest system developed by the Original Ortho-Flex, and marked the beginning of the Ortho-Flex story. It is a relatively simple system, with one layer of Delrin in the panel. System I is capable of allowing enough room for shoulder rotation and fits a wide range of back types. However, it is not fully capable of following the full range of motion along the back, (and can not sink or rise in the middle, for example) as the panels are not fully independent of the saddletree. It is therefore necessary with System I to pay attention to the type of tree relative to the type of back, and is not as 'user-friendly' as the systems to follow. The System I saddle can be regarded as a flexible panel saddle, as opposed to a flexible panel system fully independent of the saddletree. The panels are a single layer, with .093 of Delrin in the panel which attached to the tree about 6' inwards from the ends of the bars and were 1 ½' longer than the following System II. This created longer skirts (not good for short backed or deep backed horses). The panels are mounted by means of a wood screw with washer into the tree. The system had a few advantages, being less expensive to build, and a little easier to mount the panels. This system was eventually replaced by System II because it did not allow the panels to flex downward in the middle with the horse’s back, and the panel stiffness had to be adjusted to compensate for the increased rider’s weight. Tree shape was also critical for the system to function so custom fitting through tree changes was often necessary. The System I was a vast improvement over the traditional saddle in weight-bearing area but required a tree shape not adaptable to all types of riding.

THE SUCCESSOR: The System II or Mock II Patent (8/15/1991-USA) began in 1990. The Original Ortho-Flex developed a breakthrough in the existing technology. System II offers a mounting system for the panels, which allows the panels to conform to all three dimensions of motion dynamics, thus making possible an automatic fit, not only in the shoulder rotation, but also along the back. The backs of the panels are mounted in a track that enables the entire panel to conform to a radical range of back contours. With the addition of this sliding mount at the rear, the panels actually push down and away from the center of the tree with force that enables the entire panel to conform to a radical range of backs and most importantly, allows the panels to conform to the horse’s back profile while the horse is motion, completely independent of the tree. In System II the panels are moved away from the tree about 1/8' to 3/8' on steel rocker spacer mountings. The construction of these panels is 3 layers of Delrin at the mounting, where each one is successively smaller, creating what is termed as 'progressive loading' or a load-distribution on the entire surface. This makes pressure points virtually impossible directly under these rocker spacers, and mounting the front mounts 4.5 inches back from the front edge of the panel allows for scapula rotation. In addition to its other advantages, System II can rise or sink with the back and so became the flagship system for the Original Ortho-Flex Saddle Co. Since the buyout of the Original Ortho-Flex Saddle Company by the Saddle Works Saddle Company, the System II mounting has been altered. The panels are now mounted 2.25 inches in from the front of edge of the panel. This modification has seriously stiffened up the panels in the shoulder area.

THE EXTRA: System III In the quest for further progress, the Original Ortho-Flex developed this panel. It was designed to address fitting the most difficult horses to saddle; those with very pronounced shoulders, or mutton-withered and broad.That difficult conformation is often exaggerated by a short back or croup-high conformation. It’s also seen some in warm-bloods. (For history, the 'original' System III is patented as part of system or mock II (2/18/1994 -USA), and was based on three mountings, on either side of the saddle bars, allowing the panel to slide. But Ortho-Flex Saddle Company never built this system because it did not work. So there are no laws or patents to protect the current System III. This system was then modified based on the System II with a refinement in the front part of the panel; it looks like a giant hand with five fingers. These fingers allow the panel to conform itself even more closely to the shape and motion of the shoulder, thus offering more freedom of movement. Two results of this new construction is that it was only offered as an expensive option on some saddle models, and the use of rivets to stabilize the five fingers resulted in excessive stress which causes the fingers to either crack or break.

THE ADJUSTABLE:System IVPro-adjustable (tied into the extra system III patent) could be regarded as a high-tech breakthrough in flexible panel systems. The height of the panel mounting points can be adjusted quickly and easily with the use of an Allen wrench within a one-inch range, thus allowing the user to optimally balance the saddle and the rider, even on a horse with truly unusual conformational challenges.

THE LICENSE: This license from the Original Ortho-Flex Saddle Co. was sold to 'Rocking R' who then changed their name to Timberline, which was sold to K-B Saddle Shop - who kept the name, SK Saddle, Watson Brothers Saddles (former Rocking R) for a time sold out to Ozark Mountain Saddles who since terminated relations with Richard Watson and the Saddle Ranch. This system is a hybrid of Ortho-Flex Systems I and II. These saddle companies do not feature the System II mounting method but do offer the track system at the back of the panel. Like System I, they are also built on a single layer of Delrin, but thicker (1.25 vs the .093) allowing for rider support. The saddletree selection is crucial to the panel/tree configuration and the choice of thicker Delrin enables this system to perform nicely. The panels are also capable of some flexing in the middle, although not to the degree that the higher systems offer. This saddle construction, like the System I, is more like a saddle with a flexible panel, than a real system. Due to the adjustable rigging, the saddle can be positioned to compensate for this difference most of the time and can be fitted relatively well to a wide range of back types.

THE VARIATIONS: The Ultra Flex, Oakfield, Ultra-Flex Vario, Ultra-Flex Adjuster, Reactor Panel Saddle and lastly the Free & Easy Saddles all have a multi-layered delrin panel, and some have removable and or adjustable mounting spots to adjust for the limitations in the panel and tree design in regards to fitting the horses shoulder and back. Great skill and knowledge is required to achieve a good fit, due to the fact that these panels are truly not self-adjusting.

MODIFIED EXTRA & VARIATION:System VI or Mock 6, and the later System VIII or Mock 8 by the Ortho-flex Saddle Works Company. This system has taken the rivets out of the fingers of the Original Ortho-Flex System III and replaced this design with a flower petal pattern in both the front and sometimes rear of the panel- resembling a 7-leaf clover. This pattern was first conceived in the Free and Easy saddle and then copied by the Ortho-Flex Saddle Works Company, which bought the original Ortho-Flex Saddle Co. and the rights to use the 'Ortho-Flex' ® trademark name, (as Len brown did not stop making saddles because he did not believe in the system, he simply lost his company due to poor management). This design is also added to the rear of the panel, and offered on select saddle models as an upgraded feature. This design can be used alone in a single layer delrin or is used conjunction with a multi-layer panel. So regardless how many names of 'systems' come from this single design is it all the same concept, just sliced up to make it appear as if there is more.

THE ULTIMATE:System V American Saddles-Grb (Patent in Germany only 3/9/2001-Europe # EP1292316A2): Represents another step forward in flexible panel construction. This new construction that improves upon principles seen in its predecessors and offers solutions to problems occasionally associated with other systems. Due to the uniqueness of this system and its high performance, it is currently patented, and copies no other. The front of the panel is made of three layers, with 15 separate fingers (and no rivets holding them together) in the first layer, which is mounted 5' from the front edge of the panel, providing an even softer fit in the shoulder, allowing complete freedom in its rotation. This construction extends to the area of the withers so even extremely high and wide withers are afforded complete freedom. This is then covered by the second layer with six fingers, overlapping the first and enabling an automatic and equal distribution of weight along the entire length of the panel, including the middle section, thus preventing the so-called 'bridge-fit'. After that comes a third layer with no fingers. Every layer is smaller than the layer before. Construction was also changed in the rear. This design has also three multi-layer construction; the second layer resembles that of two fingers flowing towards the center of the panel, to insure optimal weight distribution–including the middle section. This special design, using various sizes and thickness of Delrin, has been computer-calculated and curved, insuring that this system gives optimal distribution of weight along the entire length of the panel, both inside and out. Now even when your horse is in motion, bending and flexing, regardless of your horse’s shoulder width, height, holes and dips behind the shoulder and back, you and he will be able to move in supreme comfort and freedom. The mounts and hardware used is of steel and the rivets used in the layering of the Delrin sheets are of aluminum. They call their saddle line American-Flex.

THE TECHNOLOGY CONTINUES: System VII (based on System V), American Saddles continued their quest for perfection. Research tests made possible an addition: the panel has more cuts (feathering in the top area along the spinal processes of the withers) and has a more rounded front. This made it more comfortable for those horses who have extremely high razor withers, and also for horses who have broad and wide withers. It will even fit those horses with 'heart-shaped' backs where you can roll a marble down their spine. Overwhelming success during the 2002 confirmed what computer scans recommended. Both horses and riders are thrilled with the panel’s success.

COMBINATIONS: System VIII or Mock 8 Saddle Works Ortho-Flex has combined the single layer System I with the finger cuts of the System III and by cutting short the front of the panel in come versions, all done in order to address the issue of excessive pressure at the mounting points in the saddle. This really does not qualify as new system but modifies preexisting ones. However, they are calling this combination System VIII, which still requires great care in fitting, due to the horses shape and selection of the correct saddle tree in order to achieve an acceptable fit.

A NEW DEVELOPMENT: System IX. In 2005 after 35 years of combined experience in repairing all of the earlier systems of saddles Eldorado Saddle and Tack along with Hill View Farms came up with a better panel design. Added to the rear mounts are stainless steel slides, making the panels virtually maintenance free. This feature is added to the already proven System VII panel. However, the rivets are of copper for better strength and performance than the aluminum used in the System V and VII, and the mounts are of steel. So radical was the improvement in 2005 on performance of the preexisting System VII, that the 7E easy slide (as it was referred to during the experimental year of testing) needs to be in a category by itself, thus the System IX (9) was created. Eldorado Saddle and Tack calls this line by a variety of names, Amera-Flex, Ameri-flex, 7E, Easy Slide and Eldorado saddles

EVOLUTION: System X. During the year 2007, when the Delrin panels alone were maximizing performance in earlier systems, several small but significant innovations made big changes in the overall panel performance, durability and fit. Based on the System VII design and the slide plate of the System IX, the System X has taken the features of these and made the best design yet. Several small changes together have made a major difference. However this system must have a saddletree that is equal in design function for the panels to perform exquisitely. The first of several changes to the panels are the rivets. Gone are the copper and aluminum that were once used in the layering assembly of the panels. New are the stainless steel and nickel alloy rivets that eliminate the work-hardening fatigue (the amount of flexing a metal can take before it breaks) seen with earlier systems (this fatigue results in pressure points on the horse). Another improvement is the new pivot mechanism - again eliminating premature ware. With the advancements in machining we can get a true ball-in-socket action. By using different radii on the insert and the washer, this ball-in-socket joint performs with pure fluidity, providing maximum panel movement with closer contact. With this new assembly the clicking and popping noise once heard during the break in period of earlier systems has been virtually eliminated. Another hindrance in panel flexibility has been the backer and foam layer of padding used on the underside of all earlier systems. This padding is what cushions the semi-rigid Delrin material, as well as, the mechanical hardware used in the assembly process, from direct contact with the horses back as well as eliminating the pressure ridges that occurred when inferior materials or assembly is used. The improved backing is fingered to match the finger cuts in the Delrin panel it self. Having this padding match the fingers allows for the little subtleties on a horse's or mule's shoulder, back and wither conformation– especially if he has an unusual or highly pronounced shoulder / scapula. On earlier systems the panels tended to fall into the dip or hollow behind the shoulder, creating excessive pressure from the over all rigidness of the front of the panel - especially in the western saddles. These small differences have made so dramatic an improvement in the overall function of the panels by eliminating the dreaded ware out of the attachment points of panel to tree which in time could possibly create uneven pressure. With the time, dedication and field testing starting in 1986 we are proud to introduce this new system. System X will very unlikely be knocked off as the technical inputs are high and the return on investment is low. Thus no room for traditional marketing avenues and the reason why we post JUST HOW these saddles are made on the web site. System X delivers a performance difference, much like, if you had been playing the piano with mittens and then graduated to gloves. System X is offered by Hill View Farms for retail and wholesale sales.

Companies out of business or re-marketing: 2012: Rocking R, Watson Brothers Saddles, Ozark Mountain Saddles and Saddle Ranch are all out of business. Eldorado Saddle & Tack (Amera-Flex, Ameri-flex, 7E, Easy Slide and Eldorado saddles) and American-Flex Saddles of Germany are now made by D-K Saddlery - who are using photo's of the Evolutionary saddle's fit on horses backs to sell their brand. Unfortunately, there are many other saddle companies doing the same thing of misleading their customers. Do your homework and ask questions of the company to confirm the legitimacy of the products they produce. The act of copying another's photo's and writing is the act of a desperate person/company. As for the person/company who's work was copied, sadly it is a form of flattery.

Ortho-Flex Flex Bar System. The New Ortho-Flex Gen II made by National Bridle. In 2000 Len Brown released Ortho-Flex and Acie Johnson bought the company, changed the name to, The Ortho-Flex Saddle Works and moved to Arkansas. In 2013 he sold the company to Chase Dodd who moved it from Arkansas to Tennessee and brought back the old name of the company 'Ortho-Flex' and changed some of the terminology used to describe the panels from Mock to Systems. In May of 2013, the Chase Dodd family sold the company to Winners Circle (David Thomas) and who is a parent company to a multi faceted organization that serves the equine community. David Thomas, turned over Ortho-Flex to its subsidiary, National Bridle (Bobbie Beach) located in Lewisburg, TN - the name has since been changed back to Ortho-Flex. After great deliberation and looking at traditional marketing avenues, using existing materials from other saddle brands, they are conforming to a traditional build on one of the rubber type of Flex Trees. This will allow for a fast and very profitable build in order to produce hundreds of saddles a year. Gone are the panels. So traditional saddle fitting practices must take place by using pads to address the horses shape as they age and change shape.

What is next to come? You can bet that I’ll keep you posted. Speaking of which,I have had inquiries regarding special saddles pads - as many companies are now producing them. These pads have a white semi-rigid product in them that looks and performs similar to Delrin. The plastic material is NOT Delrin but a flexible type of plastic - 'like the kind you can nail through' (you cannot do this with Delrin) as told to me by Len Brown, developer of one of these types of pads called the corrector. There is another pad, which I prefer, made by the CSI pad company that contains the Flex-Plate. This plate is the exact design as the system 5 panel. All of these saddle pads perform similar to an independent panel, free of the saddletree and work in conjunction with your current rigid tree saddle to aid in its performance and fit. However you MUST already have a saddle that fits your horse fairly well. These pads – which may require shims to achieve an acceptable fit –without question will help an ill-fitting saddle. I have personally worked with these pads and they do have a place within the saddling industry, especially for those who have spent thousands on a custom tree saddle - made for their horse, only to find that the saddle really does not fit. As with any expensive pad, you must have the option to return it for a refund (if within the time frame offered and in a clean condition) if the product does not meet with the manufactures claims.

A new twist on panels: 'The Living Tree saddle'. Uses a rigid tree, a carbon fiber shell over styro-foam, with panels filled with carbon fiber tubs. Some interesting points, removable fenders and adjustable seat size. New item on market and not thoroughly field tested. But make no mistake, this is a PANEL SADDLE.

Rememberto always get a trial period to test ride a saddle before getting trapped into product that will not serve the purpose you intended. If you cannot get this service, then you do not need the product. Remember it is YOUR money and the manufacturersclaims to performance.

IT IS OFFICIALLY CONFIRMED AND THE INK IS DRY!
CONGRATULATIONS to Lara Kronberger of 211085 Galvin Ave, Stratford, WI 54484. 715-660-0146 cell and email [email protected] Lara will be taking over and rebuilding the websites located at www.evolutionarysaddles.com and www.evolutionarysaddles.com. You will see the new site very soon!
As the next generation Evolutionary Saddle builder, Lara is dedicated to the continued growth and evolution of Evolutionary Saddles LLC, to which it names stands for. She has been following this saddle technology for years and has been using these saddles on all shapes of horses, her own, those of her riding group and has even taken it on vacation where she rode in it for a very exciting horse drive in Idaho.
Lara herself is an accomplished saddler, rider and excels at technology – and so much more as she, like me, is a polymath. I at 60 plus years, see all of me in her but, she is much younger. She literally blows me away with her knowledge in everything and her unflappable ability to work through every detail with razor sharp precision is astounding. She is a force to be reckoned with. I can’t wait until she becomes my age, to see how far and how big she can become with her talents and numerous accomplishments.
You will know this the minute she answers the phone and you hear “hello”, Lara is the next generation of Evolutionary Saddle builder where she puts you and your horse first.
Lara is already taking calls for orders and is assembling a build list along with a team to begin midsummer 2021 to ship saddles. She currently is half way through building the saddle and tack shop and has machinery and product inventory already in place.
I cannot be more proud and honored to have her drop out of the heavens and seek me out, as I never advertised and trusted in faith that good things will happen.
Call her – get yourself on the build list to get the most advanced dream saddle in the world, for your comfort and for your horses’ best performance. 715-660-0146 Lara cell or text

My most sincere, from my heart to yours, Congratulations Lara!
To all of you who have followed, promoted and been riding these saddles MY DEEPEST GRATITUDE AND THANKS! – We together did not give up to big box store cheaply constructed throwaway one horse only saddles, but with our passion over the past 20 plus years have truly made a life time of saddle to which the name will forever live on Evolutionary Saddles LLC.
THANK YOU! ~Cathy

If you want to talk to your horse, then LOOK at your saddle.

Working always on the horses behalf. ~ Cathy

SaddlesSystem DescriptionSaddling videosSaddling BasicsThe JourneyReturn to index

© 2001- 2020

Web Master - Cathy Sheets Tauer